A kitchen remodel in Town ’N’ Country runs $15,000 to $25,000 for a refresh, $25,000 to $45,000 mid-range, and $45,000 and up for a full custom open-concept build, taking 4 to 8 weeks on site.
CraftLine is a licensed design build contractor and we remodel kitchens throughout Town ’N’ Country. We handle design, cabinets, counters, permits, and the full build with one crew and one fixed price. Here is what a kitchen remodel costs in Town ’N’ Country, how long it takes, and what we run into in homes here.
Kitchen Remodel Cost in Town ’N’ Country
| Kitchen project level | Typical investment | What it covers |
|---|---|---|
| Refresh | $15,000 to $25,000 | New cabinets or refacing, countertops, sink, fixtures, paint, same footprint |
| Mid-range remodel | $25,000 to $45,000 | New cabinets, quartz counters, tile, lighting, appliances, minor layout changes |
| Full / high-end | $45,000 to $80,000+ | Gut to studs, moved walls, island, custom cabinetry, premium finishes, new plumbing and electrical |
Your number comes down to kitchen size, whether you keep or move the layout, and your cabinet and countertop choices. Custom cabinets and a relocated island push toward the top of the range; keeping the footprint and refacing keeps it lower. Estimate your own with our free Tampa Bay remodeling cost calculator, or see the 2026 kitchen remodel budget guide for detail.
Kitchens in Town ’N’ Country
The 1960s to 1980s block ranch homes that define Town ’N’ Country almost all came with closed-off galley kitchens walled away from the living and dining rooms. That is the single most common request we get here: take down the wall, open the kitchen to the main living space, and add an island. Because these homes are concrete block with simple roof trusses, that wall is usually straightforward to open with the right beam. We also commonly replace original single-pane windows and dated electrical panels while the kitchen is apart.
Town ’N’ Country is unincorporated Hillsborough County, so kitchen permits, including the structural permit to remove a wall, run through the county. We pull and manage all of it.
What Your Kitchen Remodel Includes
- Design and a 3D layout before anything is ordered
- Cabinets, from quality stock to full custom
- Quartz, granite, or butcher block countertops
- Tile backsplash, sink, faucet, and fixtures
- Updated lighting, including recessed and under-cabinet
- Plumbing and electrical moves where the new layout needs them
- Permits, inspections, and a fixed written price
Three things drive your kitchen price more than anything else: whether you keep or move the layout, stock cabinets versus full custom, and your countertop and appliance tier. Keeping the footprint and choosing quality stock cabinets with quartz lands most kitchens in the mid-range. Moving walls, adding a big island, and going custom pushes toward the high end.
How CraftLine Works
Every kitchen remodel runs the same clear way, so there are no surprises:
- Walkthrough and quote. We come out, measure, listen to what you want, and put a real scope and price in writing.
- Design and selections. You see a 3D layout and pick finishes before anything is ordered or demolished.
- Permits and build. We pull every permit and one dedicated crew does the work, with your project manager on site.
- Walk and warranty. We finish with a punch-list walk and back the work with our written warranty.
You can see finished kitchens, baths, and full renovations on our project portfolio.
The Wall: What It Takes to Open a Town ’N’ Country Galley
Nine out of ten kitchen calls we get in this neighborhood are the same request. Take down the wall between the kitchen and the living room. Here is how that job actually works and what decides the price.
The good news first. In most of these 1960s to 1980s block ranches, the exterior block walls carry the roof trusses and the interior partitions do not. When that is the case, the wall between your kitchen and living room is non-structural, it comes out in a day, and you are paying for drywall, ceiling patch, flooring transition, and moving whatever switches and outlets lived in it. That is why an open-concept conversion is genuinely cheaper here than in a South Tampa frame house.
The exception is the homes with a bearing beam or a girder truss running the other direction, which does happen in the larger plans and in anything with a room addition off the back. Then the sequence is: an engineer sizes the beam, the sizing goes into the permit set for Hillsborough County plan review, we shore the ceiling temporarily, set the beam, and get it inspected before anything gets closed up. It adds weeks to the schedule more than it adds drama.
What should worry you is a contractor who declares your wall non-bearing from the doorway without going into the attic. Twenty minutes with a flashlight is what separates a clean job from a sagging ceiling.
Kitchen Cost by Footprint in Town ’N’ Country
The block ranch galley kitchens here are typically 100 to 200 square feet, which is why our costs land lower than the South Tampa pages on this site. Mid-range remodel work in the Tampa market runs roughly $150 to $250 per square foot, and that reconciles cleanly with our tier pricing.
| Kitchen size | Mid-range at market rate | What it covers |
|---|---|---|
| 100 sq ft galley | $15,000 to $25,000 | Semi-custom cabinets, quartz, mid-range appliances, same footprint |
| 150 sq ft | $22,500 to $37,500 | Same scope with room for a peninsula and better lighting |
| 200 sq ft after opening the wall | $30,000 to $50,000 | Island, new layout, relocated appliances, new circuits |
Notice what happens when the wall comes down. You are not just paying for demolition, you are paying to finish a bigger room. The island, the extra cabinet run, and the additional lighting are what move the number, not the wall itself.
The Three Other Things We Fix While the Kitchen Is Open
Homes of this era in Town ’N’ Country tend to have the same three issues, and the kitchen remodel is the cheapest moment to address them.
- The electrical panel. A lot of these houses still run 100 amp service that was never sized for a modern kitchen, let alone a modern kitchen plus a heat pump plus an EV charger. Going to a 200 amp service now is far cheaper than pulling new cabinets off the wall to do it in three years.
- Single-pane aluminum windows. The kitchen window is usually original. Replacing it while the wall is already open and the room is already dusty avoids paying twice for containment and patching, and an impact-rated unit contributes to your wind mitigation credits.
- Popcorn ceilings. Very common in this build era. If the ceiling is coming down anyway where the wall was, doing the whole room at once is a fraction of the cost of a separate ceiling job later. On homes of this age, test before disturbing it.
Permits in Unincorporated Hillsborough County
Town ’N’ Country has a Tampa mailing address but it is unincorporated Hillsborough County, so your permit goes to the county, not the city. This trips up homeowners and out-of-area contractors constantly. A kitchen that touches plumbing, electrical, or structure needs a county building permit with electrical and plumbing sub-permits, and structural work always gets a plan review. We pull all of it and manage the inspections.
Related local work: Town N Country whole home remodeling, Town N Country bathroom remodeling, and Carrollwood kitchen remodeling.
What Homeowners Say
CraftLine is a licensed, insured design build contractor and an active member of NARI Tampa Bay. Our work carries a 5.0 rating across 93 Google reviews.
Frequently Asked Questions
How much does a kitchen remodel cost in Town ’N’ Country?
Most kitchens here land between $15,000 for a refresh and $45,000 for a mid-range remodel, with full custom and high-end builds running $45,000 to $80,000 and up.
How long does a kitchen remodel take?
Plan on 4 to 8 weeks of on-site work once materials are in. Custom cabinets add lead time, usually 4 to 12 weeks before install, so we order early and schedule around them.
Do you handle the design and the cabinets too?
Yes. We are design build, so the design, cabinet order, and construction all run under one roof. You are not coordinating a separate designer, cabinet shop, and contractor.
Can you open up the galley kitchens common in Town N Country block homes?
Yes, and we do it often. Most Town ’N’ Country ranches have a wall between the kitchen and living room that we can remove with a properly sized and permitted beam, opening the space and adding an island. The block construction makes it predictable.
How do I know if my kitchen wall is load bearing?
Someone has to look in the attic and see which direction the trusses run and what they bear on. In most Town ’N’ Country block ranches the exterior walls carry the load and the interior partition does not, but the larger plans and homes with rear additions are the exception. We check before we quote.
What does the beam add if the wall is bearing?
An engineer’s sizing letter, a Hillsborough County plan review, temporary shoring, the beam itself, and an inspection. It adds a couple of weeks to the schedule and a defined line to the budget. It is normal work, not a reason to abandon the plan.
Can I get a real island in a galley footprint?
Not without opening the wall. A 100 square foot galley does not have the clearance. Once the wall is out and the room reads at 200 square feet, an island with 42 inch walkways fits comfortably in most of these plans.
Do I permit through the City of Tampa or the county?
The county. Town ’N’ Country is unincorporated Hillsborough, even though your mail says Tampa. Permits, sub-permits, and inspections all go through Hillsborough County.
Get a Real Number for Your Project
Want an exact price for your kitchen remodel in Town ’N’ Country? Schedule a free quote and we will walk the space, talk through your goals, and put a fixed scope and price in writing. Prefer to talk now? Call us at (813) 522-4359.
Related: Town N Country whole home remodeling and Town N Country bathroom remodeling.